DJM-S7

KEY FEATURES

Magvel Fader Pro

We’ve enhanced the feeling of the Magvel Fader Pro and boosted the rigidity of the knob mounting shaft in the vertical direction by 30 percent so you can scratch with even more confidence.

Inside story – MAGVEL FADER evolution

Large Performance Pads

The 8 large Performance Pads on each channel are easy to hit when you want to rapidly fire off Hot Cues and samples. And with independent pad modes, you can use 2 different features – one on each channel’s set of pads – at the same time.

Discover more

Large Performance Pads

Combo Pad mode

Activate Combo Pad mode in Serato DJ Pro to use 2 different pad modes on the same channel simultaneously, e.g. Hot Cue and Sampler. This reduces the need to change modes and gives you the option to combine more features to enhance your performance.

Scratch Bank

With the Scratch Bank pad mode, you can instantly load scratch samples from 4 banks that you’ve assigned in Serato DJ Pro by simply tapping a pad. You can load from a specified start point too – handy if you want to use this feature to drop in full tracks during a routine.

Large effect levers

Twist sounds on the fly by adding effects with the large levers. The DJM-S7 includes all 22 built-in Beat FX from the DJM-S11 so you can get creative with these, as well as software effects in Serato DJ Pro and rekordbox. It’s easy to change the 6 effects assigned to the FX Select buttons and you can keep an eye on the name and beat value of the one you’re using by glancing at the OLED display.

Bluetooth input: Wirelessly add audio from your phone

Simply pair your phone with the DJM-S7 via Bluetooth and you can drop sounds straight into your set. You can play loops to scratch over or use a music app to play a track requested by someone in the audience. Or simply have your mobile device connected and ready as a backup in case your laptop fails. You can play the sound directly through the master output or either of the channels.

Discover more

Bluetooth input: Wirelessly add audio from your phone

Step 1: Press and hold the [BLUETOOTH PAIRING] button

Press and hold the [BLUETOOTH PAIRING] button for approximately 2 seconds. The unit enters its pairing state. The Bluetooth indicator blinks while the unit is in the pairing state.

Step 2: Perform the pairing procedure on your Bluetooth device

Perform the pairing procedure on your Bluetooth device while the unit is in the pairing state. The Bluetooth indicator on the unit stops blinking and lights up when the connection is established. If you use a Bluetooth device that you’ve previously paired with the unit, you can connect again by pressing the [BLUETOOTH PAIRING] button briefly.

Loop MIDI: Automated control of DJ software functions

This feature in the effects section of the DJM-S7 can control various functions in your DJ software by repeatedly sending a MIDI signal to the software in a set beat cycle. Functions including Hot Cue, sampler, and key shift-up are preassigned so you can start using Loop MIDI straight away.

Loop MIDI: Pattern A

You can create a buildup by gradually shortening the beat cycle of a snare sample which is playing in a loop.

Loop MIDI: Pattern B

You can also raise or lower the key of deck 1 or 2 track, activate sampler slot 1 or Hot Cue 1 / A, or mute the deck.

OTHER FEATURES

USB hub

Plug your DJ controllers and other devices – including selected units from other brands – into the dual USB-A ports to play with them.

MIDI controller

This device is fully MIDI assignable via USB. Send control information to external devices and use the mixer as a MIDI controller.

Serato DJ Pro

Connect your PC/Mac to use Serato DJ Pro (the mixer unlocks the software for free). Use dedicated buttons for effects and advanced Serato features including Beat Jump, Slip mode, and Quantize.

Serato DVS

Use Serato DVS to control and scratch with CDJs or turntables.

Pitch 'n Time DJ

Serato DJ Pro Expansion Pack Voucher (Pitch 'n Time DJ) is included. Use Pitch Play, Key Shift, and more features. The mixer is fully MIDI mappable too.