22 January, 2014

Pioneer DJ launches the RMX-500 effects unit

Pioneer DJ is launching the most easy-to-use multi-effects unit yet: the engaging REMIX-STATION 500 (RMX-500). The lightweight effector takes some of the best features from the top-flight RMX-1000, but gains a more simplified layout, on-board customisation, and ingenious one-handed control of multiple parameters.

The RMX-500 puts dedicated buttons for five drum samples, five Audio FX and ten Scene FX at DJs’ fingertips. Then they simply rotate the large Pressure Controller knobs – one for Rhythm FX and one for Scene FX – to manipulate FX depth, and press to control sub-parameters – all in one intuitive movement.

The new Customise button adds even more choice, enabling DJs to quickly select and save their preferred variations of Scene FX and drum samples. Also new is the Rhythm FX section, which provides a simple way to access the Audio FX and Overdub sequencer. Plus the RMX-500 introduces a Signal Flow button, which gives DJs the option to instantly add Scene FX to Rhythm FX.

Like the club-standard RMX-500, the effector can also be used in the studio as a controller for RMX-1000 VST/AU/RTAS virtual plug-ins. An on-board sound card means producers can plug their headphones in to the RMX-500 for high-quality audio as they create music or master DJ sets.

The small and portable RMX-500 has RCA inputs for easy connection to all CDJs in the range; DJs could even add one to each CDJ in their set-up. Watch Origin Sound’s mind-blowing performance with two RMX-500s and the flagship CDJ-2000NXS and DJM-900NXS

The RMX-500 will be available from February 2014.

KEY FEATURES OF THE REMIX-STATION 500

  1. Unique Pressure Controller knobs give simultaneous control of multiple parameters
    Two large, Pressure Controller knobs give DJs access to multi-dimensional manipulation with just one hand. Once an effect or drum sample has been triggered, they can simply twist the knob right/left to manipulate the wet/dry balance, and press it to modulate sub-parameters. Multi-layered FX are made easier and more accessible for unlimited creativity.


  2. Simple layout designed for instant access to all the unit’s features
    The RMX-500 is divided into three easy-to-use areas, with dedicated buttons giving direct access to a host of features:

    Ten auto-quantized Scene FX
    Dedicated buttons and Pressure Controller knobs give DJs the power to intuitively build the music up using Mod, Echo, Noise, Spiral Up and Reverb Up, and break it down with High Pass Filter, Low Pass Filter, Zip, Spiral Down and Reverb Down. Each effect has two possible variations – four for Noise – that can be accessed by hitting the Customise button. And Echo+ adds extra echo for an even bigger sound and smoother mix.

    New Rhythm FX with five drum samples and five Audio FX
    The RMX-1000’s X-Pad has been replaced with an easier-to-use Rhythm FX section. DJs can use the dedicated buttons to trigger five versatile drum samples – Kick, Snare, Clap, Hi Hat, Cymbal – each of which has six beat/sound variations that can be selected during live performance. Five Audio FX – Roll, Trans, Add, Rev Delay, Offset – add another layer of manipulation, all controlled using the Pressure Controller knobs. The Overdub button enables DJs to sequence their own beats and Rhythm FX combinations on the fly, while the Signal Flow changes the flow of the music to enable DJs to add Scene FX to the Rhythm FX in play; or slice, dice and repeat processed audio from the Scene FX in the opposite direction.

    Three handy Release FX buttons
    The Release FX buttons have been moved to the centre of the RMX-500, giving DJs easier access to back spins, brakes and echo, helping them exit complex effect combinations in style. The length and interval of each effect can be changed using the Customise button.

  3. Customise button enables on-the-fly changes to settings
    The RMX-500 can be customised directly on the hardware, with no need to plug into software on a computer. Selected sounds and settings are automatically stored for next time when the unit is not in use. DJs can customise to:
    • Select preferred Scene FX
    • Select from six drum sample variations per sound
    • Set the lengths of back spins, brakes and echo
    • Change Overdub length between 4 and 8 beats


  4. VST/AU/RTAS control and sound card bring a physical element to producing
    In addition to live performances, the versatile RMX can be used in the studio for producing music and mastering DJ sets. Producers simply plug the unit into a computer to control a virtual RMX-500 VST/AU/RTAS plug-in – without using the mouse or keyboard – and run virtual instances on as many channels as their processor can handle. Plus an on-board sound card and stereo jack provide a high-quality audio output for their headphones or speakers.


  5. Other features
    • Auto BPM: automatically measures and follows the music’s tempo
    • MIDI support: can be used as a MIDI controller
    • Compact and sleek design: highly portable for DJs on the move
    • X-Stand: can be mounted on the portable Pioneer T-U101 stand (sold separately)


MAIN SPECIFICATIONS

Inputs

Input x 1 (RCA, stereo)

Outputs

Output x 1 (RCA, stereo)
Headphone Monitor Out x 1 (¼-inch jack)

Other Ports

USB x 1 (B port, stereo 1-in/-out)

Sampling rate

48 kHz

A/D and D/A converter

24-bit

Frequency response

20 Hz - 20 kHz

Total Harmonic
Distorion ratio

0.006% or less

S/N ratio 96 dB
External dimensions (W x D x H) 306 x 67 x 132 mm
Internal Sound card 48 kHz, 16-bit
Weight 0.93 kg


* VST is a trademark of Steinberg Media Technologies GmbH
* The Audio Units logo is a trademark of Apple, Inc.
* Pro Tools® and RTAS® are registered trademarks of Avid Technology, Inc. or its subsidiaries in the United States and/or other countries
* The RMX-500 is required to install the RMX-500 plug-in to PC/Mac

Find Pioneer DJ online at:

Products

Top results

See all results

Didn’t find what you’re looking for? Maybe use fewer words or a more general search term.
If you still have no luck you can contact our customer service.