Support.All Software

CDJ-900NXS: actualizări software și firmware

Prin descărcarea de software și firmware, sunteți de acord cu termenii Acord de licență pentru utilizator final software.

Firmware Update

  • CDJ-900NXS firmware
  • Versiune
    1.31
  • Ultima actualizare
    05.oct..2017
  • Descriere

    This firmware is a system software program for your DJ PLAYER.
    Please update the firmware to the latest version to enhance the product's performance.

    Please read Firmware Update Guide to check the firmware version of your DJ PLAYER and how to update the firmware.

    Ver.1.31 Update
    [FIXED]
    • Track playback speed sometimes did not return to the BPM displayed on the screen when Sync is enabled.
    • Fixed certain issues during playback and track selection.

    File Name:CDJ900NXS_v131.zip
    File Size: 8.03 MB (8,424,970 bytes)

    The following file will be extracted.
       C900NXS.UPD (17,500,515 bytes)

Software Update

  • CDJXDJ Aggregator Tool for Mac
  • Versiune
    1.0.4
  • Ultima actualizare
    27.feb..2020
  • Descriere

    For connecting multiple players to a Mac, as well as designating them as audio output device targets for your supporting DJ software, you will first need to set up an aggregated device.
    This can normally be accomplished by using Audio MIDI Setup, a utility which comes bundled with Mac OS X.
    We have provided an alternative program called CDJ/XDJ Aggregator, which simplifies this procedure to a single click.

    Please also download the instruction manual and read through it before installing the tool software.

    This tool is not necessary for Windows users because Windows CDJ/XDJ drivers support audio output to multiple players.

    Please be sure to install and use the Windows drivers corresponding to your player.


    You can use this aggregator for the models below.
  • rekordbox
  • Descriere

    Please visit the rekordbox site for the latest news and updates.

Drivers

MIDI Mapping files

  • CDJ-900NXS Traktor HID connection guide
  • Descriere

    This section describes the necessary information when you use your CDJ-900NXS with TRAKTOR.

    The CDJ-900NXS has a computer control mode which enables you to control TRAKTOR PRO 2 by connecting your computer with a USB cable.

    If you don't own TRAKTOR PRO 2 software, please visit the Native Instruments website for more information.

    The internal USB soundcard allows you to use the CDJ-900NXS as an audio output device for TRAKTOR PRO 2.

    Before using the CDJ as a TRAKTOR PRO 2 controller:

    • Update the firmware to the latest version (Ver.1.21 or later)
    • Ensure that TRAKTOR PRO 2 is updated to Ver.2.8.1
    • The CDJ works with the standard driver software installed on your computer (Windows/Mac OS)
    • To set up your CDJ-900NXS with TRAKTOR PRO 2, please read the Connection Guide (June, 2015)

    Before using the CDJ as a TRAKTOR PRO 2 Audio Output Device:

    • Update the firmware to the latest version (Ver.1.21 or later)
    • Ensure that TRAKTOR PRO 2 is updated to Ver.2.8.1
    • The CDJ works with the standard driver software installed on your Mac. Windows users need to install the provided driver software (Ver.1.210 or later)
    • To set up your CDJ-900NXS with TRAKTOR PRO 2, please read the Connection Guide (June, 2015)
Tutoriale, manuale și documentare
Găsiți toate tutorialele, manualele și documentația pentru CDJ-900NXS.
Centre de service
Descoperiți unde vă puteți deservi echipamentul DJ.

Rezultate de top

Vezi toate rezultatele

Nu ați găsit ce căutați? Poate folosiți mai puține cuvinte sau un termen de căutare mai general.
Dacă încă nu aveți noroc, puteți contacta serviciul clienți .