RMX-500: actualizări software și firmware

If the firmware version of your unit is Ver.1.08, you don't need to update the firmware.
Please read the manual to check the firmware version of your RMX-500 and how to update the firmware.

Unzip the downloaded file "RMX-500_v108_MAC64_2.zip". This file will appear: RMX-500_v108_MAC64_2.dmg

Notice to macOS Big Sur users
Important notice for updating firmware on macOS Big Sur

If the firmware version of your unit is Ver.1.08, you don't need to update the firmware.
Please read the manual to check the firmware version of your RMX-500 and how to update the firmware.

RMX-500 Plug-in is a plug-in software application. To use this software, the plug-in must be running within a host application supporting the plug-in (VST or Audio Units). By using RMX-500 Plug-in, the same effects as during DJ performances can be used on a music creation application. In this way, the RMX-500 can be connected to a computer and used as a controller, so the various functions can be used to create music intuitively, in the same way as when holding DJ performances.

Use this Plug-in with the latest firmware.

Unzip the downloaded file and read the Operating Instructions.

• Plug-in software was not installed correctly on OS X El Capitan.

Supported OS version and Latest information

Notice to users of Mac OS X 10.8 or later
Apple has tightened its security in OS X 10.8 (Mountain Lion) and later. This is why you may see an alert dialogue when you install driver software or firmware downloaded from Pioneer Support Website or run an uninstaller. The alert dialogue says "[File name] can't be opened because the identity of the developer cannot be confirmed". Please follow the steps below to open the file and install or uninstall it. 

1. Open [Finder].
2. Click the downloaded file or right-click (or control-click) it and select [Open] from the displayed menu.
3. Select [Open] in the displayed dialogue.
4. Follow the instruction in the dialogue to complete the installation.

RMX-500 Plug-in is a plug-in software application. To use this software, the plug-in must be running within a host application supporting the plug-in (VST or Audio Units). By using RMX-500 Plug-in, the same effects as during DJ performances can be used on a music creation application. In this way, the RMX-500 can be connected to a computer and used as a controller, so the various functions can be used to create music intuitively, in the same way as when holding DJ performances.

Use this Plug-in with the latest firmware.

Unzip the downloaded file and read the Operating Instructions.

• Plug-in software did not start correctly on Windows10. 

Supported OS version and Latest information

DRIVER FOR WINDOWS 10

This driver will allow you to connect your RMX-500 to a PC.
Please read the Operation Instructions for the installation procedure.

Unzip the downloaded file "RMX500****exe.zip". This file will appear:RMX-500****.exe

If audio is not output with an error message, please follow the instructions here to solve the problem.

• DJ applications running on certain versions of Windows 10 did not detect Pioneer DJ equipment.

Supported OS version and Latest information

Installation issue with Microsoft Windows 10 / 8.1 / 8

If your Windows OS is Windows 8.1 or 7, please use the DRIVER FOR WINDOWS 8.1 / 7.