XDJ-1000MK2: aktualizacje oprogramowania i oprogramowania układowego

This firmware is a system software program for your DJ PLAYER.
Please update the firmware to the latest version to enhance the product's performance.

Please read Firmware Update Guide to check the firmware version of your DJ PLAYER and how to update the firmware.

• Mac OS Catalina 10.15 was unable to recognize the hardware as an audio device.
• Unable to play some Apple Lossless files.
• Different KEY sort order was only shown in the PLAYLIST category (from other categories order).

File Name：XDJ1000MK2_v142.zip
File Size：11.3 MB (11,887,717 bytes)

The following file will be extracted.
   XDJ1KMK2.UPD (25,389,837 bytes)

For connecting multiple players to a Mac, as well as designating them as audio output device targets for your supporting DJ software, you will first need to set up an aggregated device.
This can normally be accomplished by using Audio MIDI Setup, a utility which comes bundled with Mac OS X.
We have provided an alternative program called CDJ/XDJ Aggregator, which simplifies this procedure to a single click.

Please also download the instruction manual and read through it before installing the tool software.

This tool is not necessary for Windows users because Windows CDJ/XDJ drivers support audio output to multiple players.

Please be sure to install and use the Windows drivers corresponding to your player.

• CDJ-3000
• CDJ-TOUR1
• CDJ-2000NXS2
• CDJ-2000NXS
• CDJ-900NXS
• CDJ-850
• CDJ-350
• CDJ-2000
• CDJ-900
• CDJ-400
• XDJ-1000MK2
• XDJ-1000
• XDJ-700

USB CONNECTION (LINK Export) DRIVER FOR Windows10

This driver software will allow you to use rekordbox Link Export feature via USB connection.
You can use this driver software for the models below. The latest has been released on 10/09/2020.

• CDJ-3000
• CDJ-2000NXS2
• CDJ-TOUR1
• XDJ-1000MK2
• XDJ-XZ
• XDJ-RX2
• XDJ-RR

1. Download the driver software compatible with your OS from the download link.
2. Unzip the downloaded zip file.
3. Double-click the setup.exe file and install it to your computer.

USB CONNECTION (LINK Export) DRIVER FOR Windows8.1

This driver software will allow you to use rekordbox Link Export feature via USB connection.
You can use this driver software for the models below. The latest has been released on 10/09/2020.

• CDJ-3000
• CDJ-2000NXS2
• CDJ-TOUR1
• XDJ-1000MK2
• XDJ-XZ
• XDJ-RX2
• XDJ-RR

1. Download the driver software compatible with your OS from the download link.
2. Unzip the downloaded zip file.
3. Double-click the setup.exe file and install it to your computer.

AUDIO DRIVER FOR WINDOWS

These drivers will allow you to connect your CDJ / XDJ to a computer.
Please read the Manual for the installation procedure.

Unzip the downloaded file "Pioneer_CDJXDJ_Driver_***.exe.zip". This file will appear: Pioneer_CDJXDJ_Driver_***.exe

• Support for CDJ-3000.

• CDJ-3000
• CDJ-TOUR1
• CDJ-2000NXS2
• CDJ-2000NXS
• CDJ-900NXS
• CDJ-850
• CDJ-350
• CDJ-2000
• CDJ-900
• CDJ-400
• XDJ-1000MK2
• XDJ-1000
• XDJ-700

Mac OS users:
You don't have to install this driver software. Mac OS standard audio driver will be automatically installed when you CDJ is connected to your Mac with a USB cable.

USB CONNECTION (LINK Export) DRIVER FOR MAC

This driver software will allow you to use rekordbox Link Export feature via USB connection.
If you are using Mac OS X 10.10 or earlier, this driver is not required.
You can use this driver software for the models below. The latest has been released on 10/09/2020.

• CDJ-3000
• CDJ-2000NXS2
• CDJ-TOUR1
• XDJ-1000MK2
• XDJ-XZ
• XDJ-RX2
• XDJ-RR

1. Download the driver software compatible with your OS from the download link.
2. Unzip the downloaded zip file.
3. Double-click the .pkg file and install it to your computer.

USB CONNECTION (LINK Export) DRIVER FOR Windows7

This driver software will allow you to use rekordbox Link Export feature via USB connection.
You can use this driver software for the models below. The latest has been released on 02/02/2016.

• CDJ-2000NXS2
• CDJ-TOUR1
• XDJ-1000MK2
• XDJ-XZ
• XDJ-RX2
• XDJ-RR

1. Download the driver software compatible with your OS from the download link.
2. Unzip the downloaded zip file.
3. Double-click the setup.exe file and install it to your computer.