* Omnivision OV5695 MIPI CSI-2 sensor

Required Properties:
- compatible: should be "ovti,ov5695"
- clocks: reference to the 24M xvclk input clock.
- clock-names: should be "xvclk".
- dovdd-supply: Digital I/O voltage supply, 1.8 volts
- avdd-supply: Analog voltage supply, 2.8 volts
- dvdd-supply: Digital core voltage supply, 1.2 volts
- reset-gpios: Low active reset gpio

The device node must contain one 'port' child node for its digital output
video port, in accordance with the video interface bindings defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.

Example:
&i2c1: camera-sensor@36 {
	compatible = "ovti,ov5695";
	reg = <0x36>;
	pinctrl-names = "default";
	pinctrl-0 = <&clk_24m_cam>;

	clocks = <&cru SCLK_TESTCLKOUT1>;
	clock-names = "xvclk";

	avdd-supply = <&pp2800_cam>;
	dvdd-supply = <&pp1250_cam>;
	dovdd-supply = <&pp1800>;

	reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;

	port {
		wcam_out: endpoint {
			remote-endpoint = <&mipi_in_wcam>;
			data-lanes = <1 2>;
		};
	};
};
