DJM-S11: software & firmware updates

This firmware is a system software program for your DJM-S11.
Please update the firmware to the latest version to enhance the product's performance.

Please read Firmware Update Guide to check the firmware version of your DJM-S11 and how to update the firmware.

• Following the Ecodesign Directive (Directive 2009/125/EC) of the European Union, the time needed for the unit to automatically switch off has been changed to 20 minutes when the Power Management function is turned on.
  Please note:
  ・The name of the energy-saving function, (previously called Auto Standby or Auto Power-Off, depending on the model), has now been changed to Power Management.
  ・To learn more about the Power Management function, see the latest Instruction Manual, which is available online.

• Fixed an issue that in rare cases caused the waveform display to disappear, which occurred when the setting of the input selector switch was changed while connected to Windows/Mac computer.

File Name: DJM-S11_Ver105_Mac.zip
File Size: 4.73 MB (4,963,203 bytes)

The following file will be extracted.
DJM-S11_Ver105_Mac.dmg (5,007,621 bytes)

This firmware is a system software program for your DJM-S11.
Please update the firmware to the latest version to enhance the product's performance.

Please read Firmware Update Guide to check the firmware version of your DJM-S11 and how to update the firmware.

• Following the Ecodesign Directive (Directive 2009/125/EC) of the European Union, the time needed for the unit to automatically switch off has been changed to 20 minutes when the Power Management function is turned on.
  Please note:
  ・The name of the energy-saving function, (previously called Auto Standby or Auto Power-Off, depending on the model), has now been changed to Power Management.
  ・To learn more about the Power Management function, see the latest Instruction Manual, which is available online.

• Fixed an issue that in rare cases caused the waveform display to disappear, which occurred when the setting of the input selector switch was changed while connected to Windows/Mac computer.

File Name： DJM-S11_Ver105_Win.zip
File Size：3.72 MB (3,906,069 bytes)

The following file will be extracted.
DJM-S11_Ver105_Win.exe (5,007,621 bytes)

DRIVER FOR MAC

You don't have to install this driver software. Mac OS standard audio driver will be automatically installed when your DJM is connected to your Mac with a USB cable.
This software is a setting utility software that allows you to change the settings of the DJM.
Please read the Manual for the installation procedure.

Unzip the downloaded file "DJM-S11_M_1.0.2.dmg.zip". This file will appear: DJM-S11_M_1.0.2.dmg.

• Fixed an issue where previously set FX were not automatically called up when the DJM-S11 was connected to a Mac.
• Other minor issues have been fixed.

• Disconnect the USB cable before installation.
• The message "PIONEER DJM-S11 Driver Update Available" may appear when you start Serato DJ Pro after installing this software, but there is no need to install it again.

Supported OS version and Latest information

DRIVER FOR WINDOWS

This driver will allow you to connect your DJM to a computer.
Please read the Manual for the installation procedure.

Unzip the downloaded file "DJM-S11_1.010.exe.zip". This file will appear: DJM-S11_1.010.exe.zip.

• Multi language support.

• Minor issues have been fixed.

Note: Disconnect the USB cable before installation.

Supported OS version and Latest information