All software

DJM-900NXS2: software & firmware updates

By downloading software and firmware, you agree to the terms of our Software End User License Agreement.

Firmware Update

  • DJM-900NXS2 firmware
    Download link (1.17 MB)
  • Version
    2.05
  • Latest update
    19/Dec/2017
  • Description

    This firmware is a system software program for your DJ MIXER.
    Please update the firmware to the latest version to enhance the product's performance.

    Please read Firmware Update Guide to check the firmware version of your DJ MIXER and how to update the firmware. 

    Ver.2.05 Update
    [FIXED]
    • Incorrect audio input/output signal was sent when connecting to an iOS device.
    • When connecting to an iOS device, connections with the iOS device and the effect channel selector switch did not work.

    File Name:DJM-900NXS2_205.zip
    File Size:1.17 MB (1,229,324 bytes)

    The following file will be extracted.
       DJM-900NXS2_205.upd (3,630,594 bytes)

Drivers

  • DJM-900NXS2 driver for Mac Yosemite
    Download link (0.92 MB)
  • Version
    1.0.2
  • Latest update
    13/Dec/2016
  • Description

    DRIVER FOR MAC YOSEMITE

    This driver will allow you to connect your DJM to a computer.
    Please read the Manual for the installation procedure.

    Unzip the downloaded file "DJM-900NXS2_M_***.dmg.zip". This file will appear: DJM-900NXS2_M_***.dmg

    Ver.1.0.2 Update
    [FIXED]
    • Mac (OSX 10.10 or earlier) did not recognise the DJM-900NXS2 on some occasions when connected via USB.

    *If you already have driver v1.0.0 installed please uninstall it using the uninstaller and then install the latest driver v1.0.2. The uninstaller is included in the download file.

    Supported OS version and Latest information

    When the error message “Kernel extension is not from an identified developer” appears while installing a driver, please click “OK” and close the dialogue.

    Notice to users of Mac OS X 10.8 or later
    Apple has tightened its security in OS X 10.8 (Mountain Lion) and later. This is why you may see an alert dialogue when you install driver software or firmware downloaded from Pioneer Support Website or run an uninstaller. The alert dialogue says "[File name] can't be opened because the identity of the developer cannot be confirmed”. Please follow the steps below to open the file and install or uninstall it.

    1. Open [Finder].
    2. Double-click the downloaded dmg file.
    3. Click the pkg or app file or right-click (or control-click) it and select [Open] from the displayed menu.
    4. Select [Open] in the displayed dialogue.
    5. Follow the instruction in the dialogue to complete the installation or run the application.

    Open source notice:
    This software includes open source software codes licensed under Apple Public Source License, Version 2.0 ("APSL"). The machine readable copy of the corresponding source code is available here.

  • DJM-900NXS2 driver for Mac El Capitan or later
    Download link (0.83 MB)
  • Version
    2.0.2
  • Latest update
    04/Oct/2016
  • Description

    DRIVER FOR MAC EL CAPITAN OR LATER

    This driver will allow you to connect your DJM to a computer.
    Please read the Manual for the installation procedure.

    Unzip the downloaded file "DJM-900NXS2_M_***.dmg.zip". This file will appear: DJM-900NXS2_M_***.dmg

    Ver.2.0.2 Update
    [FIXED]
    • Setting Utility Tool worked incorrectly when using macOS Sierra.

    Supported OS version and Latest information

    Installation issue with macOS High Sierra 10.13

    If your Mac OS is v10.10 or older, please use the DRIVER FOR MAC YOSEMITE.

    When the error message “Kernel extension is not from an identified developer” appears while installing a driver, please click “OK” and close the dialogue.

    Notice to users of Mac OS X 10.8 or later
    Apple has tightened its security in OS X 10.8 (Mountain Lion) and later. This is why you may see an alert dialogue when you install driver software or firmware downloaded from Pioneer Support Website or run an uninstaller. The alert dialogue says "[File name] can't be opened because the identity of the developer cannot be confirmed”. Please follow the steps below to open the file and install or uninstall it.

    1. Open [Finder].
    2. Double-click the downloaded dmg file.
    3. Click the pkg or app file or right-click (or control-click) it and select [Open] from the displayed menu.
    4. Select [Open] in the displayed dialogue.
    5. Follow the instruction in the dialogue to complete the installation or run the application.

    Open source notice (APSL) :
    This software includes open source software codes licensed under Apple Public Source License, Version 2.0 ("APSL"). The machine readable copy of the corresponding source code is available here.

Tutorials, manuals & documentation
Find all tutorials, manuals and documentation for the DJM-900NXS2.
Software Information
Find all software information for the DJM-900NXS2.
Service centres
Discover where you can get your DJ gear serviced.

Top results

See all results

Didn’t find what you’re looking for? Maybe use fewer words or a more general search term.
If you still have no luck you can contact our customer service.