Software Information CDJ-900NXS

For all information about TRAKTOR Series, please visit www.native-instruments.com.

This section describes necessary information when you use your CDJ-900NXS with TRAKTOR Series. The CDJ-900NXS equips a computer control mode.
That mode enables the CDJ-900NXS to control TRAKTOR Series by connecting your computer with a USB cable.
The CDJ-900NXS equips an internal USB sound card. So you can use this sound card as an audio output device for TRAKTOR Series.

Using the CDJ as a TRAKTOR PRO 3 Controller

How to setup (February, 2019)

• Operating Instructions (Windows / Mac OS)
  Connection Guide
  This is instructions regarding to connection and setting of TRAKTOR Series software.
• TRAKTOR PRO 3 (Windows / Mac OS)
  TRAKTOR PRO 3 Ver.3.0.2
• Driver software (Windows / Mac OS)
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
• CDJ-900NXS Firmware (Windows / Mac OS)
• Ver.1.31 or later
  
  

Using the CDJ as TRAKTOR PRO 3 Audio Output Devices

Pioneer DJ provides driver software for TRAKTOR Series.
With this file, you can use the CDJ-900NXS's internal audio sound card as an audio output device for TRAKTOR Series.

How to setup (February, 2019)

• Operating Instructions (Windows / Mac OS)
  Connection Guide
  This is instructions regarding to connection and setting of TRAKTOR Series software.
• TRAKTOR PRO 3 (Windows / Mac OS)
  TRAKTOR PRO 3 Ver.3.0.2
• Driver software
  
  Windows
  Ver.1.500 or later
  
  Mac OS
  It isn't necessary to install the driver software. 
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
  
  
• CDJ-900NXS Firmware (Windows / Mac OS)
  Ver.1.31 or later

For all information about Serato DJ Pro, please visit serato.com.

This section describes necessary information when you use your CDJ-900NXS with Serato DJ Pro.

CDJ-900NXS is a certified USB controller for Serato DJ Pro from Serato. CDJ-900NXS has a computer control mode. That mode enables the CDJ-900NXS to control Serato DJ Pro by connecting your computer with a USB cable.

The internal USB sound card does not work as Serato DJ Pro's audio output device. You need to use an audio output device comes with Serato DJ Pro or a mixer that equips an audio output device for Serato DJ Pro.

Using the CDJ as a Serato DJ Pro Controller

You can control Serato DJ Pro from the CDJ-900NXS.

How to setup (May, 2014)

• Operating Instructions (Windows / Mac OS)
  Connection Guide
  This is instructions regarding to connection and setting of Serato DJ Pro.
• Serato DJ Pro (Windows / Mac OS)
  Ver.1.7.0
• Driver software (Windows / Mac OS)
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
• CDJ-900NXS Firmware (Windows / Mac OS)
  Ver1.20 or later

Serato DJ Pro software download

Serato DJ Intro and Serato DJ have been renamed and are now known as Serato DJ Lite and Serato DJ Pro, respectively.
If you currently use Serato DJ, you can continue to use Serato DJ Pro for free.
Update your Serato setup to Serato DJ Pro for free here.
https://serato.com/dj/pro/downloads
Serato DJ Pro Installation guide