Software Information CDJ-350

For all information about Scratch Live, please visit serato.com.

This section describes necessary information when you use your CDJ-350 with Serato Scratch Live.

The CDJ-350 is a certified USB controller for Scratch Live from Serato. The CDJ-350 has a computer control mode. That mode enables the CDJ-350 to control Scratch Live by connecting your computer with a USB cable.

Using the CDJ as a Scratch Live Controller

You can control Scratch Live from the CDJ-350.

How to setup (November, 2011)

• Operating Instructions (Windows / Mac OS)
  Connection Guide
  This is instructions regarding to connection and setting of Scratch Live.
• Scratch Live (Windows / Mac OS)
  Ver2.3.0
• Driver software (Windows / Mac OS)
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
• CDJ-350 Firmware (Windows / Mac OS)
  Ver1.08 or later

The internal USB sound card does not work as Scratch Live's audio output device. You need to use an audio output device comes with Scratch Live or a mixer that equips an audio output device for Scratch Live.

For all information about TRAKTOR PRO 2, please visit www.native-instruments.com.

This section describes necessary information when you use your CDJ-350 with TRAKTOR.

The CDJ-350 equips a computer control mode. That mode enables the CDJ-350 to control TRAKTOR PRO/PRO2 by connecting your computer with a USB cable. The CDJ-350 equips an internal USB sound card. So you can use this sound card as an audio output device for TRAKTOR PRO/PRO2.

Using the CDJ as a TRAKTOR PRO/PRO2 Controller

Pioneer provides a TRAKTOR PRO/PRO2 MIDI file for the CDJ-350. With this file, you can control TRAKTOR PRO/PRO2 by the CDJ-350.

How to setup (November, 2011)

• Operating Instructions (Windows / Mac OS)
  Connection Guide
  This is instructions regarding to connection and setting of TRAKTOR PRO/PRO2 software.
• TRAKTOR PRO/PRO2 (Windows / Mac OS)
  TRAKTOR PRO Ver1.2.6
  TRAKTOR PRO2 Ver2.0.0
• MIDI Mapping File (Windows / Mac OS)
  Ver1.01
  TSI file
• CDJ-350 Firmware (Windows / Mac OS)
  Ver1.08 or later

Using the CDJ as TRAKTOR PRO/PRO 2 Audio Output Devices

Pioneer provides driver software for TRAKTOR PRO/PRO2. With this file, you can use the CDJ-350's internal audio sound card as an audio output device for TRAKTOR PRO/PRO2.

How to setup (November, 2011)

• Operating Instructions (Windows / Mac OS)
  Connection Guide
  This is instructions regarding to connection and setting of TRAKTOR PRO/PRO2 software.
• TRAKTOR PRO/PRO2 (Windows / Mac OS)
  TRAKTOR PRO Ver1.2.6
  TRAKTOR PRO2 Ver2.0.0
• Driver software
  Windows
  Ver1.200 or later
• Mac OS
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
• CDJ-350 Firmware (Windows / Mac OS)
  Ver1.08 or later