Software Information CDJ-3000X

This section describes necessary information when you use your CDJ-3000X with "rekordbox".

CDJ-3000X has a computer control mode.
That mode enables the CDJ-3000X to control rekordbox by connecting your computer with a USB cable.
The CDJ-3000X equips an internal USB sound card. So you can use this sound card as an audio output device for rekordbox.

Those who do not own rekordbox , please visit rekordbox web site.
https://rekordbox.com/

Using the CDJ-3000X as a rekordbox Controller

You can control rekordbox from the CDJ-3000X.

How to setup (September, 2025)

• Operating Instructions (Windows / Mac OS)
  Connection Guide for PERFORMANCE mode
  Hardware diagram
• Driver software (Windows / Mac OS)
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ-3000X works only connecting a computer with a USB cable.

Using the CDJ-3000X as rekordbox Audio Output Devices

How to setup (September, 2025)
Pioneer DJ provides driver software for rekordbox.
With this file, you can use the CDJ-3000X's internal audio sound card as an audio output device for rekordbox.

• Operating Instructions (Windows / Mac OS)
  Connection Guide for PERFORMANCE mode
• Windows
  ver. 1.0.4 or later

For all information about Serato DJ Pro, please visit serato.com.

This section describes necessary information when you use your CDJ-3000X with Serato DJ Pro.

CDJ-3000X has a computer control mode.
That mode enables the CDJ-3000X to control Serato DJ Pro by connecting your computer with a USB cable.

The internal USB sound card does not work as Serato DJ Pro's audio output device.
You need to use an audio output device comes with Serato DJ Pro or a mixer that equips an audio output device for Serato DJ Pro.
serato.com

USING THE CDJ AS A Serato DJ Pro CONTROLLER

You can control Serato DJ Pro from the CDJ-3000X.

How to setup (Sep, 2025)

• Operating Instructions (Windows / macOS)
  Connection Guide
  This is instructions regarding to connection and setting of Serato DJ Pro.
• Serato DJ Pro (Windows / macOS) : ver. 3.3.4 or later
• Driver software (Windows / macOS)
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
• CDJ-3000X Firmware (Windows / macOS) : ver. 1.10 or later

List of MIDI Messages

CDJ-3000X works with MIDI-compatible software, by assigning MIDI message.

Please refer to the list of MIDI message to find mapping values of all buttons and knobs. To assign MIDI message to all software function, please refer to your manufacturers' software manual.

Please do not run multiple DJ Software on your computer at the same time. When switching from one DJ software to use another, please turn the CDJ-3000X power off and then power back on after software switch has been completed.

For further details of the usage, please refer to the software manufacturers.

For all information about djay PRO, please visit algoriddim.com.

This section describes necessary information when you use your CDJ-3000X with djay PRO.
CDJ-3000X has a computer control mode.
That mode enables the CDJ-3000X to control djay PRO by connecting your computer with a USB cable.
The CDJ-3000X equips an internal USB sound card. So you can use this sound card as an audio output device for djay PRO.

Using the CDJ as a djay PRO Controller

You can control djay PRO from the CDJ-3000X.

How to setup (October, 2025)

• Operating Instructions (macOS)
  Connection Guide
  This is instructions regarding to connection and setting of djay PRO.
• djay PRO : ver 5.5.0
• Driver software (macOS)
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable
• CDJ-3000X Firmware : ver. 1.20 or later

Using the CDJ AS djay PRO Audio Output Devices

You can use the CDJ-3000X's internal audio sound card as an audio output device for djay PRO.

How to setup (October, 2025)

• Operating Instructions (macOS)
  Connection Guide
  This is instructions regarding to connection and setting of djay PRO software.
• djay PRO : ver 5.5.0
• Driver software (macOS) : It isn't necessary to install the driver software. 
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
• CDJ-3000X Firmware : ver. 1.20 or later