This section describes necessary information when you use your DJM-S11 with "rekordbox".
DJM-S11 has a computer control mode.
That mode enables the DJM-S11 to control rekordbox by connecting your computer with a USB cable.
The DJM-S11 equips an internal USB sound card. So you can use this sound card as an audio output device for rekordbox.
Those who do not own rekordbox, please visit rekordbox web site.
rekordbox software is available free of charge from the below website.
Please refer to the rekordbox Operating Instructions
Please refer to DJM-S11 Hardware Diagram for rekordbox.
For the latest information on the operating environment of rekordbox, please visit rekordbox.com.
Operation is not guaranteed on all computers,
even if all the required operating environment conditions indicated here are fulfilled.
Depending on the computer’s power-saving settings, etc., the CPU and hard disk may not provide sufficient processing capabilities.
For laptop in particular, make sure the computer is in the proper conditions to provide constant high performance (for example by keeping the AC power connected) when using rekordbox.
DJM-S11 works with other MIDI-compatible software besides Serato DJ Pro, by assigning MIDI message. Please refer to the list of MIDI message to find mapping values of all buttons and knobs. To assign MIDI message to all software function, please refer to your manufacturers' software manual.
When using this unit as a controller for operating MIDI-compatible software other than Serato DJ Pro, change the setting to use software other than Serato DJ Pro at the utility settings. For details, please refer to the "Using DJ software other than Serato DJ Pro" within Operating Instructions.
Please do not run multiple DJ Software on your computer at the same time. When switching from one DJ software to use another, please turn the DJM-S11 power off and then power back on after software switch has been completed.
For further details of the usage, please refer to the software manufacturers.
Please see "Serato DJ Pro Operating Instructions" for the Installation Procedure.
Please refer to the Hardware diagram for Serato DJ Pro.
When you first launch Serato DJ Pro, a [BUY/ACTIVATE] icon may be displayed in the Online panel. Those who use DJM-S11 do not have to activate the unit or buy the license. If you connect DJM-S11 to Serato DJ Pro, you can use the software without buying the license or activating the unit.
Please refer to the Pitch 'N Time DJ Activation Manual.
For further information on Serato Flip, please refer to the following website:http://support.serato.com
The Serato DJ Pro software manual is available from the website below.http://serato.com/dj/downloads
For the latest information on the operating environment of Serato DJ Pro, please visit serato.com.http://serato.com/dj/downloads#min-specs.
Operation is not guaranteed on all computers, even if all the required operating environment conditions indicated here are fulfilled.
Depending on the computer’s power-saving settings, etc., the CPU and hard disk may not provide sufficient processing capabilities. For notebook computers in particular, make sure the computer is in the proper conditions to provide constant high performance (for example by keeping the AC power connected) when using Serato DJ Pro.
Latest information of Pioneer DJ products for Mac OS
|macOS Big Sur 11 (Intel Core processor / M1 chip)
(updated to the latest version)
|macOS Catalina 10.15 (updated to the latest version)|
|macOS Mojave 10.14 (updated to the latest version)|
Latest information of Pioneer DJ products for Windows® OS.
|Windows 10 (latest service pack)|