Software Information

Software Information DDJ-WeGO

Serato

  • To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:
    • Latest update : 04/Oct/2018
    • DDJ-WeGO supports the latest DJ Software Serato DJ Lite and Serato DJ Pro from Serato now.

      To the customers who use Serato DJ Pro:
      We have identified an issue where DDJ-WeGO is not recognized by Serato DJ Pro
      even after the application is launched on some Windows PC.
      If the above issue occurs, please click here.
      If you do not solve the issue by the above information, please see the related questions in FAQ, too.

      ※Serato DJ Lite and Serato DJ Pro do not support "Mix Pulse function".

      Please note
      Please note that the OS supported by Serato DJ Pro is different from the OS supported by Serato DJ Lite.

      Support Operating System
      For the latest information on the operating environment of Serato DJ Pro and Serato DJ Lite, please visit Serato.com.

      List of MIDI Messages

      Serato DJ Lite

      Serato DJ Lite is available from the web site below for free of charge.
      http://serato.com/downloads/dj-intro

      Please refer to the Serato DJ Lite setup guide below.
      Serato DJ Lite setup guide
      Please refer to Hardware diagram below for Seraro DJ Intro.
      Hardware diagram

      Serato DJ Pro

      Serato DJ Pro is available from the web site below.
      serato.com/dj

      Please refer to the Serato DJ Pro setup guide below.
      Serato DJ Pro setup guide
      Please refer to Hardware diagram below for Seraro DJ.
      Hardware Diagram

  • TRAKTOR

  • To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:
    • Latest update : 11/Aug/2015
    • For all information about TRAKTOR, please visit www.native-instruments.com.

      DDJ-WeGO supports the latest DJ Software TRAKTOR PRO 2 from Native Instruments now.
      Please use this Setting File in this page when you use DDJ-WeGO as a controller for "TRAKTOR PRO 2 Ver 2.6.0".
      This Setting File is required when Native Instruments TRAKTOR PRO 2 Ver.2.6.0 is used with DDJ-WeGO.
      There are some precautions before using.

      Note:
      -Need to update DDJ-WeGO Firmware to the latest one(Ver.1.06 or later).
      -Need to update TRAKTOR PRO2 to Ver.2.6.0.

      Download Setting file for TRAKTOR PRO 2

      Refer to the Import guide of Setteig file for TRAKTOR PRO 2 below
      TRAKTOR PRO 2 Import Guide

      Refer to Hardware diagram below for TRAKTOR PRO 2
      Hardware diagram

      List of MIDI Messages

  • Virtual DJ

  • To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:
    • Latest update : 11/Aug/2015
    • *Important notice to those who manage tracks in iTunes library with VirtualDJ:
      It was recently discovered that users may not be able to see or load tracks when using iTunes v12 with VirtualDJ.
      VirtualDJ LE 7.4.2 and VirtualDJ PRO Full 7.4.2, where this issue has been fixed, are now available on the Atomix website.

      Applicable applications
      • VirtualDJ LE 7.4.2
      • VirtualDJ PRO Full 7.4.2

      Applicable OS
      • OS X 10.9, 10.8, 10.7

      Please follow the instructions below to install Virtual DJ LE7.4.2.

      VirtualDJ Limited Edition

      The latest v7.4 of "VIRTUALDJ LE" bundled with DDJ-WeGO is supported by Windows 8. (16 July, 2013 Update)

      Hardware Diagram
      VirtualDJ LE Sound Effect User Guide
      MIX PULSE User Guide
      List of MIDI Messages

      For those who use VirtualDJ LE for DDJ-WeGO for the first time
      For those who use VirtualDJ for the first time, please follow the instructions below to install the application.

      How to install VirtualDJ:
      1. Please follow www.virtualdj.com/le
      2. Enter the serial number (XXXX-XXXX-XXXXX/WEGO) printed on your controller’s bottom panel in the field of [KeyCode] and click [OK].
      3. Download the both installers applicable to your computer (install_virtualdj_le_wego_v7.4.1 and install_virtualdj_le_v7.4.2) to your computer.
      4. Please follow [Installing the software] in the Operating Instructions to install the downloaded installer (install_virtualdj_le_wego_v7.4.1).
      5. Please follow [Installing the software] in the Operating Instructions to install the downloaded installer (install_virtualdj_le_v7.4.2).
        *Only on Windows PC, when you see two icons, [VirtualDJ LE (DDJ-WeGO)] and [VirtualDJ LE], you can click either icon to run VirtualDJ LE.

      For those who already use VirtualDJ LE for DDJ-WeGO
      For those who already use VirtualDJ LE for DDJ-WeGO, please follow the instructions below to update the application.

      Steps to update
      1. Access this link: www.virtualdj.com/le
      2. Enter the serial number (XXXX-XXXX-XXXXX/WEGO) printed on your controller’s bottom panel in the field of [KeyCode] and click [OK].
      3. Download the installer applicable to your computer (install_virtualdj_le_v7.4.2) to your computer.
      4. Please follow [Installing the software] in the Operating Instructions to install the downloaded installer (install_virtualdj_le_v7.4.2).
        *Only on Windows PC, when you see two icons, [VirtualDJ LE (DDJ-WeGO)] and [VirtualDJ LE], you can click either icon to run VirtualDJ LE.

      When DDJ-WeGO is connected to the computer, the [Sound Setup] tab of [CONFIG] will not be shown on VIRTUALDJ LE Ver7.4.
      When VirtualDJ LE Ver7.4 is launched after turning on the power of DDJ-WeGO, all the settings of [Sound Setup] are automatically completed.
      If you do not launch them in the right order, please shut down VirtualDJ LE and turn off the power of DDJ-WeGO. Then, launch DDJ-WeGO again before VirtualDJ.

      VirtualDJ Pro Full

      VirtualDJ Pro Full is now compatible with DDJ-WeGO.

      To purchase VirtualDJ Pro Full, visit the link below.
      www.virtualdj.com

      Note:
      There are four versions of VirtualDJ products.
      VirtualDJ Pro Full only supports controller products. DDJ-WeGO supports VirtualDJ Pro Full.
      *Software products not supporting controllers: VirtualDJ Home, VirtualDJ Broadcaster and VirtualDJ Pro Basic

  • djay

  • To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:
    • Latest update : 11/Aug/2015
    • DDJ-WeGO supports the following DJ Software from Algoriddim now.

      -djay 4
      -djay LE for Mac
      -djay 2 for iPad new
      -vjay for iPad

      Please update DDJ-WeGO Firmware to the latest one when you use these DJ Software.
      Latest Firmware

      List of MIDI Messages

      Cautions on connect to an iPad
      This device supports the iPad Air 2, iPad Air, iPad mini 3, iPad mini 2, iPad(4th generation), iPad mini, iPad(3rd generation), iPad 2.
      DDJ-WeGO connection to iPad requires the following equipment.
      -DJ Controller Cable "DJC-WeCAi" munufuctured by Pioneer (sold separately)
      -Camera Connection Kit or Lightning-USB Camera Adapter manufactured by Apple Inc
      -A USB power adapter or USB mobile battery (output voltage of 5V, output current of 500 mA or greater)
      For the connection procedure, see the manual of DJC-WeCAi.

      -This device supports only iPad with iOS 7.1 or iOS 8.
      iPads other than compatible versions are not supported.

      Visit algoriddim web site for djay 4 / djay LE / djay 2 / vjay information.
      www.algoriddim.com

      djay LE for Mac

      "djay LE for Mac" is available from the web site below for free of charge.
      www.algoriddim.com/djay-le

      ※djay LE does not support "Recording Function" and "Auto Mix Function"

      Setup Guide for "djay LE for Mac"
      Hardware Diagram

      djay 4

      Visit algoriddim web site below to purchase "djay 4".
      sites.fastspring.com/algoriddim/product/djay4

      Latest djay 4 is available from algoriddim web site below.
      www.algoriddim.com/djay-mac/download

      Setup Guide for "djay 4"
      Hardware Diagram

      djay 2 for iPad

      djay 2 for iPad (Ver. 2.6.1) is now compatible with DDJ-WeGO. (6 November, 2014 Update)
      In line with this change, the Hardware Diagram has been updated.
      Visit algoriddim web site for "djay 2 for iPad" (paid) information.
      www.algoriddim.com

      Audio Setup Guide for "djay 2 for iPad"
      Hardware Diagram

      vjay for iPad

      vjay for iPad (Ver. 1.4.2) is now compatible with DDJ-WeGO. (6 November, 2014 Update)
      In line with this change, the Hardware Diagram has been updated.
      Visit algoriddim web site for "vjay for iPad" (paid) information.
      www.algoriddim.com

      Audio Setup Guide for "vjay for iPad"
      Hardware Diagram

  • Quick Start Guide

  • To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:
  • Operating System information

    • Last edit: 22/Jun/2021
    • Latest information of Pioneer DJ products for Mac OS


      OS             
       
      macOS Mojave 10.14 (Updated to the latest version)  
           
    • Last edit: 22/Jun/2021
    • Latest information of Pioneer DJ products for Windows® OS.


      OS             
       
      Windows 10 (latest service pack)  
         
  • Top results

    See all results

    Didn’t find what you’re looking for? Maybe use fewer words or a more general search term.
    If you still have no luck you can contact our customer service.