Software Information DDJ-SR

List of MIDI Messages

DDJ-SR works with other MIDI-compatible software besides Serato DJ Pro, by assigning MIDI message. Please refer to the list of MIDI message to find mapping values of all buttons and knobs. To assign MIDI message to all software function, please refer to your manufacturers' software manual. When using this unit as a controller for operating MIDI-compatible software other than Serato DJ Pro, change the setting to use software other than Serato DJ Pro at the utility settings. For details, please refer to the "Using DJ software other than Serato DJ Pro" within the Operating Instructions.

Please do not run multiple DJ Software on your computer at the same time. When switching from one DJ software to use another, please turn the DDJ-SR power off and then power back on after software switch has been completed.

For further details of the usage, please refer to the software manufacturers.

For all information about Serato DJ Pro, please visit serato.com.

To the customers who use Serato DJ Pro:
We have identified an issue where DDJ-SR is not recognized by Serato DJ Pro even after the application is launched on some Windows PC.
If the above issue occurs, please click here.

If you do not solve the issue by the above information, please see the related questions in FAQ, too.

Serato Flip is now supported.

Serato Flip is available on Serato DJ Pro 1.7.0.
(Serato Flip is separately sold Expansion Pack for Serato DJ Pro.)
Please visit this link to use Serato Flip.

Serato Flip is now compatible with DDJ-SR.
We finished our evaluation of Serato DJ Pro 1.7.0 on DDJ-SR.

Please refer to the Serato Flip manual.

Please note that the following unexpected behaviors occur when using the PAD PLUS mode.

• When a PAD where no FLIP is saved or PAD7/ PAD8 is pressed, the LED of such a PAD flashes.
• When you select SAVED FLIP mode -> another mode -> COMBO FX mode, and then press the HOT CUE button, SAVED FLIP mode is enabled.

For further information on Serato Flip, please refer to the following website:
support.serato.com/

Serato DJ Pro Software Download

Serato DJ Pro software is available free of charge from the below website
www.serato.com/dj/downloads

Applicable model
[DJ Controller] DDJ-SR

Please refer to the Operating Instructions.

Please refer to the Hardware diagram for Serato DJ Pro.

When Serato DJ Pro is launched after it is installed, a yellow icon saying “BUY/ACTIVATE” might be displayed in the License panel on the right side of the Serato DJ Pro screen. DDJ-SR users do not have to activate or buy Serato DJ Pro. If you tick the check box of [DO NOT SHOW AGAIN] and click [Online], the icon will disappear thereafter.

Downloading the Serato DJ Pro software manual

The Serato DJ Pro software manual is available from the website below.
www.serato.com/dj/downloads

PAD PLUS Feature Tutorial

PAD PLUS Feature Tutorial

Operating environment for Serato DJ Pro

For the latest information on the operating environment of Serato DJ Pro, please visit serato.com.

• Operation is not guaranteed on all computers, even if all the required operating environment conditions indicated here are fulfilled.
• Depending on the computer’s power-saving settings, etc., the CPU and hard disk may not provide sufficient processing capabilities. For laptop in particular, make sure the computer is in the proper conditions to provide constant high performance (for example by keeping the AC power connected) when using Serato DJ Pro.

For all information about VirtualDJ 8, please visit www.virtualdj.com.

VirtualDJ 8 Operation Guide for DDJ-SX now becomes available on the Atomix website. (5 September, 2014 Update)

VirtualDJ 8 Operation Guide for DDJ-SR

Please visit the website below for any inquiries about Atomix VirtualDJ 8.
Atomix website