Software Information

Software Information DDJ-SP1

MIDI-compatible software

  • To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:
    • Latest update : 27/Jul/2015
    • List of MIDI Messages

      DDJ-SP1 works with other MIDI-compatible software besides Serato DJ Pro, by assigning MIDI message. Please refer to the list of MIDI message to find mapping values of all buttons and knobs. To assign MIDI message to all the software functions, please refer to your manufacturers' software manual. When using this unit as a controller for operating MIDI-compatible software other than Serato DJ Pro, change the setting to use software other than Serato DJ Pro at the utility settings.

      For details, please refer to the "Using DJ software other than Serato DJ Pro" within the Operating Instructions.

      Please do not run multiple DJ Software on your computer at the same time. When switching from one DJ software to use another, please disconnect the USB cable from DDJ-SP1 or Mac/PC, and then power back on after software switch has been completed.

      For further details of the usage, please refer to the software manufacturers.

  • Serato

  • To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:
    • Latest update : 27/Jul/2015
    • For all information about Serato DJ Pro, please visit serato.com.

      DDJ-SP1 supports Serato's SCRATCH LIVE.
      SCRATCH LIVE setting file is required when Serato SCRATCH LIVE Ver.2.5.0 is used with DDJ-SP1.

      Precaution:

      • Please update SCRATCH LIVE to Ver.2.5.0 or later.

      SCRATCH LIVE Setting File download

      Please see the following Import Guide for details of importing SCRATCH LIVE setting file.
      SCRATCH LIVE Setting File Import Guide

      Please refer to the following Hardware Diagram for the functions controlled by DDJ-SP1.
      Hardware Diagram for SCRATCH LIVE

  • To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:
  • To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:
    • Latest update : 04/Oct/2018
    • For all information about Serato DJ Pro, please visit serato.com.

      DDJ-SP1 supports the Serato DJ Pro, which offers a great number of functions required for DJ performances. All of this unit's buttons and controls are preset to work with the software, so DJ performances can be conducted simply by connecting this unit to a computer.

      Precautions:
      • A separate Serato DJ Pro-certified mixer (e.g. DJM-900SRT) or controller (e.g. DDJ-S1) is required.
      • Please update to Serato DJ Pro Ver.1.5.0. or later.

      Please refer to the Hardware diagram below for Serato DJ Pro/Serato Video.
      Hardware diagram for Serato DJ Pro/Serato Video

      Serato DJ Pro software download

      Serato DJ Intro and Serato DJ have been renamed and are now known as Serato DJ Lite and Serato DJ Pro, respectively.
      If you currently use Serato DJ, you can continue to use Serato DJ Pro for free.
      Update your Serato setup to Serato DJ Pro for free here.
      https://serato.com/dj/pro/downloads
      Serato DJ Pro Installation guide

      Pitch play mode is now supported.

      Pitch Play mode is available on Serato DJ Pro 1.9.6.
      To use Pitch Play mode, you need the Pitch 'n Time DJ Expansion Pack sold separately.
      Please visit here for the Pitch 'n Time DJ Expansion Pack.

      Pitch Play mode is now supported on DDJ-SP1.
      Verification of Serato DJ Pro 1.9.6 on DDJ-SP1 completed.

      Please visit here to learn how to activate Pitch 'n Time DJ.
      Please refer to Hardware Diagram for Pitch Play mode.
      For further information on Pitch Play mode and Pitch 'n Time DJ, please visit the following website:
      support.serato.com/

      Serato Flip is now supported.

      Serato Flip is available on Serato DJ Pro 1.7.0.
      (Serato Flip is separately sold Expansion Pack for Serato DJ Pro.)
      Please visit this link to use Serato Flip.

      Serato Flip is now compatible with DDJ-SP1.
      We finished our evaluation of Serato DJ Pro 1.7.0 on DDJ-SP1.

      Please refer to the Serato Flip manual.

      For further information on Serato Flip, please refer to the following website:
      support.serato.com/

      Downloading the Serato DJ Pro software manual

      The Serato DJ Pro software manual is available from the website below.
      serato.com/dj/downloads

      Operating environment for Serato DJ Pro

      For the latest information on the operating environment of Serato DJ Pro, please visit Serato.com.

      • Operation is not guaranteed on all computers, even if all the required operating environment conditions indicated here are fulfilled.
      • Depending on the computer’s power-saving settings, etc., the CPU and hard disk may not provide sufficient processing capabilities. For laptop in particular, make sure the computer is in the proper conditions to provide constant high performance (for example by keeping the AC power connected) when using Serato DJ Pro.
  • TRAKTOR

  • To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:
    • Latest update : 20/Aug/2015
    • For all information about TRAKTOR PRO 2, please visit www.native-instruments.com.

      DDJ-SP1 supports Native Instruments DJ software, TRAKTOR PRO 2.

      TRAKTOR PRO 2 setting File is required when Native Instruments TRAKTOR PRO 2 Ver.2.6.3 is used with DDJ-SP1.

      Precautions:

      • Please update to the latest firmware of DDJ-SP1 (Ver.1.01 or later).
      • Please update to TRAKTOR PRO 2 Ver.2.6.3.
      • Traktor's response time on the [Preferences] screen may slow down after importing the settings file depending on your computer's spec, but you will have no problem using this software.

      TRAKTOR PRO 2 Setting File download

      Please see the following Import Guide for details of importing TRAKTOR PRO 2 setting file.
      TRAKTOR PRO 2 Setting File Import Guide

      Please refer to the following Hardware Diagram for the functions controlled by DDJ-SP1.
      Hardware diagram for TRAKTOR PRO 2

      List of MIDI messages

  • Virtual DJ

  • To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:
  • Operating System information

    • Last edit: 14/Mar/2024
    • Supported Operating Systems


      OS             
       
      Windows 11 (latest service pack)  
         
       
      Windows 10 (latest service pack)  
         
       
    • Last edit: 14/Mar/2024
    • Latest information of AlphaTheta products for macOS.


      OS             
       
      macOS Sonoma 14 (Intel® Core™ Processor / Apple M series (*))
      (updated to the latest version)
       
         
       
      macOS Ventura 13 (Intel® Core™ Processor / Apple M series (*))
      (updated to the latest version)
       
         
       
      macOS Monterey 12 (Intel® Core™ Processor / Apple M series (*))
      (updated to the latest version)
       
         
       
      (*) Apple M1 series or later CPU    
  • Top results

    See all results

    Didn’t find what you’re looking for? Maybe use fewer words or a more general search term.
    If you still have no luck you can contact our customer service.