Software Information CDJ-900

For all information about VirtualDJ 8 Pro, please visit www.virtualdj.com.

This section describes necessary information when you use your CDJ-900 with Virtual DJ.

The CDJ-900 equips a computer control mode. 
That mode enables the CDJ-900 to control Virtual DJ Pro by connecting your computer with a USB cable. 
The CDJ-900 equips an internal USB sound card. So you can use this sound card as an audio output device for Virtual DJ Pro.

Using the CDJ as a Virtual DJ Controller

How to setup　(December, 2011)

- Operating Instructions (Windows / Mac OS)
Connection Guide
This is instructions regarding to connection and setting of VIRTUAL DJ PRO software.

Connection Diagram

- Virtual DJ Pro (Windows / Mac OS)
Ver6.0.3

- Driver software (Windows / Mac OS)
It isn't necessary to install the driver software. 
By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.

- CDJ-900 Firmware (Windows / Mac OS)
Ver4.20 or later

Using the CDJ as Virtual DJ Pro Audio Output Devices

Pioneer provides driver software for Virtual DJ Pro. 
With this file, you can use the CDJ-900's internal audio sound card as an audio output device for Virtual DJ Pro.

How to setup　(December, 2011)

- Operating Instructions (Windows / Mac OS)
Connection Guide
This is instructions regarding to connection and setting of VIRTUAL DJ PRO software.

Connection Diagram

- Virtual DJ Pro (Windows / Mac OS)
Ver6.0.3

- Driver software
Windows
Ver1.200 or later

Mac OS
It isn't necessary to install the driver software. 
By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.

- CDJ-900 Firmware (Windows / Mac OS)
Ver4.20 or later

For all information about Scratch Live, please visit serato.com.

This section describes necessary information when you use your CDJ-900 with Serato Scratch Live.

The CDJ-900 is a certified USB controller for Scratch Live from Serato. 
The CDJ-900 has a computer control mode. 
That mode enables the CDJ-900 to control Scratch Live by connecting your computer with a USB cable.

Using the CDJ as a Scratch Live Controller

You can control Scratch Live from the CDJ-900.

How to setup (December, 2011)

-Operating Instructions (Windows / Mac OS)
Connection Guide
This is instructions regarding to connection and setting of Scratch Live.

- Scratch Live (Windows / Mac OS)
Ver2.1.0

-Driver software (Windows / Mac OS)
It isn't necessary to install the driver software.
By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.

-CDJ-900 Firmware (Windows / Mac OS)
Ver4.20 or later

The internal USB sound card does not work as Scratch Live's audio output device. 
You need to use an audio output device comes with Scratch Live or a mixer that equips an audio output device for Scratch Live.
serato.com

For all information about TRAKTOR PRO 2, please visit www.native-instruments.com.

This section describes necessary information when you use your CDJ-900 with TRAKTOR.

The CDJ-900 equips a computer control mode.
That mode enables the CDJ-900 to control TRAKTOR PRO2 by connecting your computer with a USB cable. 
The CDJ-900 equips an internal USB sound card.
So you can use this sound card as an audio output device for TRAKTOR PRO2.

Using the CDJ as a TRAKTOR PRO 2 Controller

How to setup (June, 2013)

-Operating Instructions (Windows / Mac OS)
Connection Guide
This is instructions regarding to connection and setting of TRAKTOR PRO2 software.

-TRAKTOR PRO2 (Windows / Mac OS)
TRAKTOR PRO2 Ver2.6.0

-Driver software (Windows / Mac OS)
It isn't necessary to install the driver software. 
By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.

-CDJ-900 Firmware (Windows / Mac OS)
Ver4.20 or later

Using the CDJ as TRAKTOR PRO 2 Audio Output Devices

Pioneer provides driver software for TRAKTOR PRO2. With this file, you can use the CDJ-900's internal audio sound card as an audio output device for TRAKTOR PRO2.

How to setup (June, 2013)

-Operating Instructions (Windows / Mac OS)
Connection Guide
This is instructions regarding to connection and setting of TRAKTOR PRO2 software.

-TRAKTOR PRO2 (Windows / Mac OS)
TRAKTOR PRO2 Ver2.6.0

-Driver software
Windows
Ver1.200 or later

　Mac OS
It isn't necessary to install the driver software.
By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.

-CDJ-900 Firmware (Windows / Mac OS)
Ver4.20 or later

use this sound card as an audio output device for TRAKTOR PRO2.

Using the CDJ as a TRAKTOR PRO 2 Controller

How to setup (June, 2013)

-Operating Instructions (Windows / Mac OS)
Connection Guide
This is instructions regarding to connection and setting of TRAKTOR PRO2 software.

-TRAKTOR PRO2 (Windows / Mac OS)
TRAKTOR PRO2 Ver2.6.0

-Driver software (Windows / Mac OS)
It isn't necessary to install the driver software. 
By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.

-CDJ-900 Firmware (Windows / Mac OS)
Ver4.20 or later

Using the CDJ as TRAKTOR PRO 2 Audio Output Devices

Pioneer provides driver software for TRAKTOR PRO2. With this file, you can use the CDJ-900's internal audio sound card as an audio output device for TRAKTOR PRO2.

How to setup (June, 2013)

-Operating Instructions (Windows / Mac OS)
Connection Guide
This is instructions regarding to connection and setting of TRAKTOR PRO2 software.

-TRAKTOR PRO2 (Windows / Mac OS)
TRAKTOR PRO2 Ver2.6.0

-Driver software
Windows
Ver1.200 or later

　Mac OS
It isn't necessary to install the driver software.
By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.

-CDJ-900 Firmware (Windows / Mac OS)
Ver4.20 or later