By downloading software and firmware, you agree to the terms of our Software End User License Agreement.
If the firmware version is Ver.1.30, you don't need to update the firmware version.
Please read the Update Guide to check the firmware version of your CDJ-2000NXS and how to update the firmware.
File Size：4.61 MB (4,838,910 bytes)
The following file will be extracted.
C2KNXS.UPD 9.09 MB (9,541,059 bytes)
For connecting multiple CDJs to a Mac, as well as designating them as audio output device targets for your supporting DJ software, you will first need to set up an aggregated device. This can normally be accomplished by using Audio MIDI Setup, a utility which comes bundled with Mac OS X. We have provided an alternative program called CDJ/XDJ Aggregator, which simplifies this procedure to a single click.
Please also download the instruction manual and read through it before installing the tool.
This tool is not necessary for Windows users because Windows CDJ/XDJ drivers support audio output to multiple devices. Please be sure to install and use the Windows drivers corresponding to your CDJ device.
Verification of OS X Yosemite v10.10 support application software was completed.
Please visit the rekordbox site for the latest news and updates.
Please visit the rekordbox site for all information on rekordbox and rekordbox dj.
Open source notice:
This software includes open source software codes licensed under GNU General Public License 2 and / or GNU Lesser General Public License 2.1. Details of the GNU GPL and LGPL can be found at the GNU website. The machine readable copy of the corresponding source code is available here.
These drivers will allow you to connect your CDJ to a PC.
Please read the Manual for the installation procedure.
Unzip the downloaded file "PioneerCDJDriver****exe.zip". This file will appear: Pioneer_CDJ_Driver_****.exe
Windows 10 verification was completed. Use the latest driver.
Installation issue with Microsoft Windows 10 / 8.1 / 8
Mac OS users:
You don't have to install this driver software. Mac OS standard audio driver will be automatically installed when you CDJ is connected to your Mac with a USB cable.
OS X Yosemite v10.10 verification was completed.
The document describes the necessary information when you use your CDJ-2000NXS with Serato DJ.
The CDJ-2000NXS is a certified USB controller for Serato DJ from Serato. The unit has a computer control mode which enables the CDJ-2000NXS to control Serato DJ by connecting your computer with a USB cable.
If you don't own Serato DJ software, please visit the Serato website for more information.
The internal USB soundcard doesn't allow you to use the CDJ-2000NXS as an audio output device for Serato DJ. You need to use an audio output device that comes with Serato DJ or a mixer that equips an audio output device for Serato DJ.